- Weaponsights https://weaponsights.com/product-category/eotech/ Where " Top of the Line " is on " Top of our shelf " Mon, 25 Mar 2024 23:50:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.6 https://weaponsights.com/wp-content/uploads/2021/06/cropped-Weaponsights_logo_013-32x32.png - Weaponsights https://weaponsights.com/product-category/eotech/ 32 32 518.A65 https://weaponsights.com/product/518-a65/ Tue, 20 Jul 2021 18:48:09 +0000 https://weaponsights.com/?post_type=product&p=3995 With the HWS 518, the best just got better. Get all of the features found in EOTECH’s top sight, the EXPS, but with easy-to-find AA batteries. The 518 has buttons on the side that allow the user to position it close to the magnifier to reduce rail space.

The post 518.A65 appeared first on Weaponsights.

]]>

Description

  Great for nearly every shooter, the 518.A65 allows you to quickly acquire prey, allowing you to become more efficient with your shots. An efficient red dot firearm scope enables you to find your target quickly and re-acquire after your shot. Because of the EOTech Holographic Weapon Sight, buying a top grade red dot riflescope has never been a more suitable approach.

We are required to adhere to a Minimum Advertised Price (MAP) by the manufacturer, and anyone not listing this minimum price is breaking the rules or selling counterfeit, so if you find a better price advertised anywhere, please let us know and we will try to meet or beat that price!

If you want Night Vision Compatibility, look at the 558.A65. Same great sight and features plus Night Vision Compatibility.

Made in USA

Night Vision Compatibility: No

Includes:

  • HWS 518
  • Quick-Start Guide
  • Warranty Card
  • 2x AA Alkaline Batteries
  • Protective Case

Specifications:

  • Button Position: Side of Optic
  • L x W x H:  5.6″ x 2″ x 2.9″ (142.2 x 55.9 x 73.7 mm)
  • Weight:  13.8 oz (391.2 g)
  • Water Resistant:  10ft. (3 m) depth
  • Mount:  1″ Weaver or MIL-STD-1913 rail
  • Windage & Elevation Adjustment:  0.5 MOA per click
  • Button Location: Side
  • Brightness:  20 daylight settings
  • Power Source:  2 x 1.5 V AA batteries – Supports lithium, alkaline or rechargeable
  • Operating Temperature:  -40°F to 140°F (-40°C to 60°C)
  • Battery Life:

-Lithium: 2,500 continuous hours at nominal setting 12 at room temperature
-Alkaline: 2,200 continuous hours at nominal setting 12 at room temperature

General Information
This manual is an overview of the 518 HWS (Holographic Weapon Sight), and will define the basic operation, features/benefits, and options of this proprietary optical system. The HWS is a state of-the-art optical sighting system, employing holographic sighting technology for small to medium caliber weaponry and launching type plat–forms. The HWS utilizes holographic optics fabrication technology that is used in the production of advanced heads up display in attack fighter aircraft for targeting, gauge reading, weapon system verification, etc. L3 EOTECH has miniaturized the sophisticated sighting heads up display system into a compact and rugged package for use on small arms and other weapon platforms.
Key Attributes
The 518 HWS is a lightweight, non-magnifying, optical sight designed for close to mid range engagements. It allows very fast target acquisition and engagement at short ranges while providing aiming capability out to 300 meters equal to or better than iron sights. The major combat advantage of the HWS is extremely rapid reticle-on-target acquisition. As quickly as a target is identified, the holographic reticle can be superimposed on the target. The sight allows operators to maintain eye contact on the target and to place the holographic reticle onto the target without shifting focus. Operators can quickly acquire the target and reticle in the same focal plane for fast and accurate shot placement. The HWS appears to project the holographic image of a reticle on the target plane. The sight can be used as a bright open reticle image or a fine dot which is limited only by the acuity of the shooter’s eye. The heads up display window allows an undistorted and unrestricted view of the target. The 512 is offered with only one Reticle Option shown below:
          • 0 – 68 minute ring with vertical and horizontal stadia and a 1 MOA aiming dot.
          • 2- 68 minute ring with vertical and horizontal stadia and (2) 1 MOA aiming dots (HHSIII)
The HWS offers extremely fast target acquisition in Close Quarter Battle (CQB) using the large ring, and aiming precision in longer range engagements (using the MOA Dot) without obscuring the target. Another advantage of the HWS is the full field of view which allows the operator better situational awareness. The HWS employs a true heads up display (HUD) window that eliminates blind spots and constricted or tunnel vision associated with scope sights. Controls are inset into the HWS housing with no protruding knobs, battery compartment, or rings obscuring the target.
Another advantage of the HWS is the full field of view which allows the operator better situational awareness. The HWS employs a true heads up display (HUD) window that eliminates blind spots and constricted or tunnel vision associated with scope sights. Controls are inset into the HWS housing with no protruding knobs, battery compartments, or rings obscuring the target. Utilizing natural binocular vision is an advantage of this sighting system, as well as additional threat identification through increased operator situational awareness and peripheral vision.
The primary use of the HWS is for the M4A1 carbine and CQBR in Close Quarters Battle. The HWS is not however, limited to carbines. The HWS can also be used on medium caliber machine guns, grenade launchers, bolt guns, crossbows, and less than lethal projectile launchers. The sight provides a 1X (no magnification) sight picture and is not designed as a long range sight system, however, it can be used as effectively as iron sights on targets to 300 meters. The advantage of the HWS is that it provides the operator superior shooting performance, rapid reticle-on-target acquisition, full field of view and accurate shot placement. The HWS can be naturally employed by all levels of users, from novice to the most highly trained operator.
          0 – 68MOA circle with quadrant ticks with 1 MOA aiming dot
Electrical
• Power Source: 2 x Alkaline or Lithium batteries
• Battery Life: Approximately 2,200 continuous hours at nominal setting 12 with Alkaline and approximately 2,500 continuous hours at nominal setting 12 with Lithium at room temp
• Brightness Settings: 20 settings with scrolling feature
• Auto Battery Check Indicator: Flashing reticle upon start-up
• Auto Shut-down: At 8 hrs- programmable to 4 hrs
Location and Description of Major Components
Hood

The HWS is equipped with a protective hood. This hood is pre-assembled at the factory. Should your hood require repair or replacement, please contact your unit armorer for repair, replacement, or contact the manufacturer (L-3 EOTech) for repair or replacement.
Battery

Two initially supplied (2) AA alkaline batteries power the 518 HWS. The HWS is designed to maintain constant brightness at a particular setting as the batteries drain down. The reticle brightness will not fade gradually as the batteries run down, but rather, shut down abruptly. The first indication of the batteries draining is the reticle blinking when the unit is turned on. Another indication of low batteries is the reticle pattern blinking off and on during recoil. With high recoil guns, this can occur before the battery check indicates low battery condition. If the reticle pattern blinks off and on during recoil or turns off suddenly, replace the batteries. Please read and follow the battery replacement and battery check procedures described in this Manual. It is always good practice to replace the batteries with a fresh one before a mission.

Replacing the Batteries

Remove the battery compartment by lifting up on the locking cam lever and carefully sliding the battery compartment away and up from the sight housing. After the battery compartment is removed, slide the batteries out and replace them with a fresh set. The labels on the bottom of battery compartment show the correct battery orientation. Always make sure the gasket is free of dirt before the battery compartment is reinstalled or the seal may be compromised. To reinstall the battery compartment, point the sight towards the ground and slide battery compartment onto base. Make sure there is enough clearance between the contact and the batteries to avoid bending the contacts. Hold the battery compartment down firmly against the base and close the locking cam.Before you push down on cam lever, make sure the battery compartment sits all the way down and is parallel to the base. Verify correct battery installation immediately by turning on the sight and checking if the holographic reticle appears. If the batteries are left in the sight backwards, they will be drained of their power.
Windage and Elevation Adjustment

CAUTION – When encountering an increase in resistance in adjustments, the end of the adjustment range has been reached. DO NOT turn the adjustments any farther, serious damage may occur to the sight.

Preventive Maintenance Checks and Services (PMCS)

OPERATOR LEVEL MAINTENANCE
The operator is limited to replacing batteries and cleaning the battery compartment and outer housing surfaces of the sight.
REPLACING BATTERY
See the heading ‘Replacing Batteries’ under section Description of Components, Controls, and Indicators. Do not use deteriorated or corroded batteries. Inspect batteries for rips, tears, or cuts in the housing. If there is any exposed, internal content of the battery, it could potentially effect the operation of the sight.
OPERATOR CLEANING INSTRUCTIONS
1. The optical system and the window are coated with anti-reflection material. When cleaning the glass surfaces, first blow away any dirt and dust. Fingerprints and lubricants can be wiped off with lens tissue or a soft cotton cloth, moistened with lens cleaning fluid or glass cleaner sold
in any camera store. Never clean the glass surface with a dry cloth or paper towel; always dampen the glass surfaces prior to cleaning.
2. No maintenance is needed on the sight’s surface, except to occasionally wipe off with a soft cloth. Use only a water-based cleaner such as glass cleaner, ammonia, or soap and water. Never use any solvent-type cleaner such as alcohol or acetone. Do not use gun cleaner to clean or lubricate the HWS.

3. All moving parts of the sight are permanently lubricated. Do not try to lubricate them.
4. Never disassemble the sight’s optical assembly! The optical cavity is purged, nitrogen filled, and sealed to achieve fog resistant performance. Disassembly will void the warranty and damage the sight

The post 518.A65 appeared first on Weaponsights.

]]> 512.A65 https://weaponsights.com/product/512-a65/ Mon, 19 Jul 2021 22:47:40 +0000 https://weaponsights.com/?post_type=product&p=3993 Model 512 is EOTech's most popular HWS (Holographic Weapon Sight). The 512 is ideal when you need the best in speed and versatility, without Night Vision compatibility. The 512 is also compatible with the new drop-in Laser Battery Caps that EOTech designed to enhance aiming through the use of visible and IR lasers.

The post 512.A65 appeared first on Weaponsights.

]]>

Description

  The HWS 512 is perfect for anyone who wants fast target acquisition, reliability, durability, and the anyplace availability of AA batteries without the need for night-vision compatibility. The 512 is the most popular HWS in the lineup.

The L-3 EOTech HOLOgraphic Weapon Sight (HWS) is a revolutionary sighting system based on advanced holographic technology. The HWS enhances target acquisition, improves accuracy, and provides more control over your shooting environment. The HWS fills the needs of all shooters from the novice to the most advanced professional. EOTech’s objective is to give each and every customer the quality, commitment, and service expected from the sighting industry leader.

We are required to adhere to a Minimum Advertised Price (MAP) by the manufacturer, and anyone not listing this minimum price is breaking the rules or selling counterfeit, so if you find a better price advertised anywhere, please let us know and we will try to meet or beat that price!

If you want Night Vision Compatibility, look at the 552.A65. Same great sight and features plus Night Vision Compatibility.

Made in USA

Night Vision Compatibility: No

Includes:

  • HWS 512
  • Quick-Start Guide
  • Warranty Card
  • 2x AA Alkaline Batteries
  • Protective Case

Specifications:

  • Button Position: Back of Optic
  • L x W x H:  5.6″ x 2.2″ x 2.9″ (142.2 x 55.9 x 73.7 mm)
  • Weight:  13.8 oz (391.2 g)
  • Water Resistant:  33ft. (10 m) depth
  • Mount:  1″ Weaver or MIL-STD-1913 rail
  • Windage & Elevation Adjustment:  0.5 MOA per click
  • Button Location: Side
  • Brightness:  20 daylight settings  &  10 additional settings for Gen I through III
  • Power Source:  2 x 1.5 V AA batteries – Supports lithium, alkaline or rechargeable
  • Operating Temperature:  -40°F to 140°F (-40°C to 60°C)
  • Battery Life:

-Lithium: 2,500 continuous hours at nominal setting 12 at room temperature
-Alkaline: 2,200 continuous hours at nominal setting 12 at room temperature

General Information
This manual is an overview of the 512 HWS (Holographic Weapon Sight), and will define the basic operation, features/benefits, and options of this proprietary optical system. The HWS is a state of-the-art optical sighting system, employing holographic sighting technology for small to medium caliber weaponry and launching type plat–forms. The HWS utilizes holographic optics fabrication technology that is used in the production of advanced heads up display in attack fighter aircraft for targeting, gauge reading, weapon system verification, etc. L3 EOTECH has miniaturized the sophisti–cated sighting heads up display system into a compact and rugged package for use on small arms and other weapon platforms
Key Attributes
The 512 HWS is a lightweight, non-magnifying, optical sight designed for close to midrange engagements. It allows very fast target acquisition and engagement at short ranges while providing aiming capability out to 300 meters equal to or better than iron sights. The major combat advantage of the HWS is extremely rapid reticle-on-target acquisition. As quickly as a target is identified, the holographic reticle can be superimposed on the target. The sight allows operators to maintain eye contact on the target and to place the holographic reticle onto the target without shifting focus. Operators can quickly acquire the target and reticle in the same focal plane for fast and accurate shot placement. The HWS appears to project the holographic image of a reticle on the target plane. The sight can be used as a bright open reticle image or a fine dot which is limited only by the acuity of the shooter’s eye. The heads up display window allows an undistorted and unrestricted view of the target. The 512 is offered with only one Reticle Option shown below:
          • 0 – 68 minute ring with vertical and horizontal stadia and a 1 MOA aiming dot.
The HWS offers extremely fast target acquisition in Close Quarter Battle (CQB) using the large ring, and aiming precision in longer range engagements (using the MOA Dot) without obscuring the target.
Another advantage of the HWS is the full field of view which allows the operator better situational awareness. The HWS employs a true heads up display (HUD) window that eliminates blind spots and constricted or tunnel vision associated with scope sights. Controls are inset into the HWS housing with no protruding knobs, battery compartments, or rings obscuring the target. Utilizing natural binocular vision is an advantage of this sighting system, as well as additional threat identification through increased operator situational awareness and peripheral vision.
The primary use of the HWS is for the M4A1 carbine and CQBR in Close Quarters Battle. The HWS is not however, limited to carbines. The HWS can also be used on medium caliber machine guns, grenade launchers, bolt guns, crossbows, and less than lethal projectile launchers. The sight provides a 1X (no magnification) sight picture and is not designed as a long range sight system, however, it can be used as effectively as iron sights on targets to 300 meters.The advantage of the HWS is that it provides the operator superior shooting performance, rapid reticle-on-target acquisition, full field of view and accurate shot placement. The HWS can be naturally employed by all levels of users, from novice to the most highly trained operator.
The advantage of the HWS is that it provides the operator superior shooting performance, rapid reticle-on-target acquisition, full field of view and accurate shot placement. The HWS can be naturally employed by all levels of users, from novice to the most highly trained operator.
          0 – 68MOA circle with quadrant ticks with 1 MOA aiming dot
Electrical
• Power Source: 2 x Alkaline or Lithium batteries
• Battery Life: Approximately 2,500 continuous hours (lithium) at nominal setting 12; 2,000 continuous with AA alkaline at room temp.
• Brightness Settings: 20 settings with scrolling feature
• Auto Battery Check Indicator: Flashing reticle upon start-up
• Auto Shut-down: At 8 hrs- programmable to 4 hrs
Location and Description of Major Components
Hood

The HWS is equipped with a protective hood. This hood is pre-assembled at the factory. Should your hood require repair or replacement, please contact your unit armorer for repair, replacement, or contact the manufacturer (L-3 EOTech) for repair or replacement.
Battery

Two initially supplied (2) AA alkaline batteries power the 512 HWS. The HWS is designed to maintain constant brightness at a particular setting as the batteries drain down. The reticle brightness will not fade gradually as the batteries run down, but rather, shut down abruptly. The first indication of the batteries draining is the reticle blinking when the unit is turned on. Another indication of low batteries is the reticle pattern blinking off and on during recoil. With high recoil guns, this can occur before the battery check indicates low battery condition. If the reticle pattern blinks off and on during recoil or turns off suddenly, replace the batteries. Please read and follow the battery replacement and battery check procedures described in this Manual. It is always good practice to replace the batteries with a fresh one before a mission.

Replacing the Batteries

Remove the battery compartment by lifting up on the locking cam lever and carefully sliding the battery compartment away and up from the sight housing. After the battery compartment is removed, slide the batteries out and replace them with a fresh set. The labels on the bottom of battery compartment show the correct battery orientation. Always make sure the gasket is free of dirt before the battery compartment is reinstalled or the seal may be compromised. To reinstall the battery compartment, point the sight towards the ground and slide battery compartment onto base. Make sure there is enough clearance between the contact and the batteries to avoid bending the contacts. Hold the battery compartment down firmly against the base and close the locking cam.Before you push down on cam lever, make sure the battery compartment sits all the way down and is parallel to the base. Verify correct battery installation immediately by turning on the sight and checking if the holographic reticle appears. If the batteries are left in the sight backwards, they will be drained of their power.
Windage and Elevation Adjustment

CAUTION – When encountering an increase in resistance in adjustments, the end of the adjustment range has been reached. DO NOT turn the adjustments any farther, serious damage may occur to the sight.

Preventive Maintenance Checks and Services (PMCS)

OPERATOR LEVEL MAINTENANCE
The operator is limited to replacing batteries and cleaning the battery compartment and outer housing surfaces of the sight.
REPLACING BATTERY
See the heading ‘Replacing Batteries’ under section Description of Components, Controls, and Indicators. Do not use deteriorated or corroded batteries. Inspect batteries for rips, tears, or cuts in the housing. If there is any exposed, internal content of the battery, it could potentially effect the operation of the sight.
OPERATOR CLEANING INSTRUCTIONS
1. The optical system and the window are coated with anti-reflection material. When cleaning the glass surfaces, first blow away any dirt and dust. Fingerprints and lubricants can be wiped off with lens tissue or a soft cotton cloth, moistened with lens cleaning fluid or glass cleaner sold
in any camera store. Never clean the glass surface with a dry cloth or paper towel; always dampen the glass surfaces prior to cleaning.
2. No maintenance is needed on the sight’s surface, except to occasionally wipe off with a soft cloth. Use only a water-based cleaner such as glass cleaner, ammonia, or soap and water. Never use any solvent-type cleaner such as alcohol or acetone. Do not use gun cleaner to clean or lubricate the HWS.

3. All moving parts of the sight are permanently lubricated. Do not try to lubricate them.
4. Never disassemble the sight’s optical assembly! The optical cavity is purged, nitrogen filled, and sealed to achieve fog resistant performance. Disassembly will void the warranty and damage the sight

The post 512.A65 appeared first on Weaponsights.

]]> 558.A65 https://weaponsights.com/product/558-a65/ Mon, 19 Jul 2021 19:28:20 +0000 https://weaponsights.com/?post_type=product&p=3981 The HWS 558 is perfect for anyone that doesn’t like to sacrifice. The 558 is compatible with all Gen I-III night vision devices and features an adjustable, locking, quick-detach mount that offers instant removal.

The post 558.A65 appeared first on Weaponsights.

]]>

Description

  The operational buttons are located on the side of the sight making this optic ideal for use with EOTech switch-to-side magnifiers. Using (2) standard AA Batteries, this mount extends just 2″ longer than the EXPS3 Models, but finding rechargeable AA Batteries is a bit easier.

Made in USA

Night Vision Compatibility: Yes

Includes:

  • HWS 558
  • Quick-Start Guide
  • Warranty Card
  • 2x AA Alkaline Batteries
  • Protective Case

Specifications:

  • Button Position: Side of Optic
  • L x W x H:  5.6″ x 2.2″ x 2.9″ (142.2 x 55.9 x 73.7 mm)
  • Weight:  13.8 oz (391.2 g)
  • Water Resistant:  33ft. (10 m) depth
  • Mount:  1″ Weaver or MIL-STD-1913 rail
  • Windage & Elevation Adjustment:  0.5 MOA per click
  • Button Location: Side
  • Brightness:  20 daylight settings  &  10 additional settings for Gen I through III
  • Power Source:  2 x 1.5 V AA batteries – Supports lithium, alkaline or rechargeable
  • Operating Temperature:  -40°F to 140°F (-40°C to 60°C)
  • Battery Life:

-Lithium: 2,500 continuous hours at nominal setting 12 at room temperature
-Alkaline: 2,200 continuous hours at nominal setting 12 at room temperature

General Information

This manual is an overview of the 558 HWS (Holographic Weapon Sight), and will define the basic operation, features/benefits, and options of this proprietary optical system. The HWS is a state of-the-art optical sighting system, employing holographic sighting technology for small to medium caliber weaponry and launching type plat–forms. The HWS utilizes holographic optics fabrication technology that is used in the production of advanced heads up display in attack fighter aircraft for targeting, gauge reading, weapon system verification, etc. L3 EOTECH has miniaturized the sophisticated sighting heads up display system into a compact and rugged package for use on small arms and other weapon platforms.
Key Attributes
The 558 HWS is a lightweight, non-magnifying, optical sight designed for close to mid range engagements. It allows very fast target acquisition and engagement at short ranges while providing aiming capability out to 300 meters equal to or better than iron sights. The major combat advantage of the HWS is extremely rapid reticle-on-target acquisition. As quickly as a target is identified, the holographic reticle can be superimposed on the target. The sight allows operators to maintain eye contact on the target and to place the holographic reticle onto the target without shifting focus. Operators can quickly acquire the target and reticle in the same focal plane for fast and accurate shot placement.The HWS appears to project the holographic image of a reticle on the target plane. The sight can be used as a bright open reticle image or a fine dot which is limited only by the acuity of the shooter’s eye. The heads up display window allows an undistorted and unrestricted view of the target. The 558 is offered with only one Reticle Option shown below:
          • 0 – 68 minute ring with vertical and horizontal stadia and a 1 MOA aiming dot.
The HWS offers extremely fast target acquisition in Close Quarter Battle (CQB) using the large ring, and aiming precision in longer range engagements (using the MOA Dot) without obscuring the target.
Another advantage of the HWS is the full field of view which allows the operator better situational awareness. The HWS employs a true heads up display (HUD) window that eliminates blind spots and constricted or tunnel vision associated with scope sights. Controls are inset into the HWS housing with no protruding knobs, battery compartment, or rings obscuring the target. Utilizing natural binocular vision is an advantage of this sighting system, as well as additional threat identification through increased operator situational awareness and peripheral vision.
The 558 can operate in tandem with Generation I – III+ night vision intensifier tubes. Operators can see the holographic reticle image with helmet mounted or weapon mounted night vision devices. The HWS is a passive system and emits no signature from frontal or from a peripheral aspect. While in the NV mode, the sight is undetectable by opposing force night vision equipment. The HWS can be positioned behind night vision systems without any “bloom” on the target area.
The primary use of the HWS is for the M4A1 carbine and CQBR in Close Quarters Battle. The HWS is not however, limited to carbines. The HWS can also be used on medium caliber machine guns, grenade launchers, bolt guns, crossbows, and less than lethal projectile launchers. The sight provides a 1X (no magnification) sight  picture and is not designed as a long range sight system, however, it can be used as effectively as iron sights on targets to 300 meters.
The advantage of the HWS is that it provides the operator superior shooting performance, rapid reticle-on-target acquisition, full field of view and accurate shot placement. The HWS can be naturally employed by all levels of users, from novice to the most highly trained operator.
          0 – 68MOA circle with quadrant ticks with 1 MOA aiming dot
Electrical
• Power Source: 2 x Alkaline or Lithium batteries
• Battery Life: Approximately 2,200 continuous hours at nominal setting 12 with Alkaline and approximately 2,500 continuous hours at nominal setting 12 with Lithium at room temp.
• Brightness Settings: 30 settings with scrolling feature (10 settings for NV use)
• Auto Battery Check Indicator: Flashing reticle upon start-up
• Auto Shut-down: At 8 hrs- programmable to 4 hrs
Location and Description of Major Components

• Product Registration/Warranty Card

• Quick Reference Card

Hood

The HWS is equipped with a protective hood. This hood is pre-assembled at the factory. Should your hood require repair or replacement, please contact your unit armorer for repair, replacement, or contact the manufacturer (L-3 EOTech) for repair or replacement.
Battery

Two initially supplied (2) AA alkaline batteries power the 558 HWS. The HWS is designed to maintain constant brightness at a particular setting as the batteries drain down. The reticle brightness will not fade gradually as the batteries run down, but rather, shut down abruptly. The first indication of the batteries draining is the reticle blinking when the unit is turned on. Another indication of low batteries is the reticle pattern blinking off and on during recoil. With high recoil guns, this can occur before the battery check indicates low battery condition. If the reticle pattern blinks off and on during recoil or turns off suddenly, replace the batteries. Please read and follow the battery replacement and battery check procedures described in this Manual. It is always good practice to replace the batteries with a fresh one before a mission.

Replacing the Batteries

Remove the battery compartment by lifting up on the locking cam lever and carefully sliding the battery compartment away and up from the sight housing. After the battery compartment is removed, slide the batteries out and replace them with a fresh set. The labels on the bottom of battery compartment show the correct battery orientation. Always make sure the gasket is free of dirt before the battery compartment is reinstalled or the seal may be compromised. To reinstall the battery compartment, point the sight towards the ground and slide battery compartment onto base. Make sure there is enough clearance between the contact and the batteries to avoid bending the contacts. Hold the battery compartment down firmly against the base and close the locking cam.Before you push down on cam lever, make sure the battery compartment sits all the way down and is parallel to the base. Verify correct battery installation immediately by turning on the sight and checking if the holographic reticle appears. If the batteries are left in the sight backwards, they will be drained of their power.
The 558 is compatible with Generation I – III+ Night Vision Devices. At the night vision settings, the reticle brightness is low enough that when viewed with a night vision device, the reticle image does not bloom.

1. ON/ Night Vision Mode and 8 Hour Auto Shut Down
Pressing the NV Button will turn the sight ON in Night Vision Mode. The sight will turn on at Level 4 and automatically shut off 8 hours after the last pushbutton control is used. There are ten (10) NV brightness settings provided to allow the user to adjust the reticle brightness to their preference.

2. OFF/ Turning Sight OFF
To turn the sight off, press both the UP and DOWN arrows simultaneously. Verify that the sight shuts off by looking though the heads-up window with the night vision device.

3. TOGGLE/ Between Normal and Night Vision Modes
To toggle between NORMAL and NIGHT VISION MODES, press the NV button. When switching between modes, the sight will remember the last brightness setting. NOTE: When used with a Night Vision device, always check to make sure the sight is not turned on before pressing the NV button to turn on the sight in the Night Vision mode. Otherwise, it will toggle to the Normal mode and saturates the image intensifier.
Windage and Elevation Adjustment

CAUTION – When encountering an increase in resistance in adjustments, the end of the adjustment range has been reached. DO NOT turn the adjustments any farther, serious damage may occur to the sight.

Preventive Maintenance Checks and Services (PMCS)

OPERATOR LEVEL MAINTENANCE
The operator is limited to replacing batteries and cleaning the battery compartment and outer housing surfaces of the sight.
REPLACING BATTERY
See the heading ‘Replacing Batteries’ under section Description of Components, Controls, and Indicators. Do not use deteriorated or corroded batteries. Inspect batteries for rips, tears, or cuts in the housing. If there is any exposed, internal content of the battery, it could potentially effect the operation of the sight.
OPERATOR CLEANING INSTRUCTIONS
1. The optical system and the window are coated with anti-reflection material. When cleaning the glass surfaces, first blow away any dirt and dust. Fingerprints and lubricants can be wiped off with lens tissue or a soft cotton cloth, moistened with lens cleaning fluid or glass cleaner sold
in any camera store. Never clean the glass surface with a dry cloth or paper towel; always dampen the glass surfaces prior to cleaning.
2. No maintenance is needed on the sight’s surface, except to occasionally wipe off with a soft cloth. Use only a water-based cleaner such as glass cleaner, ammonia, or soap and water. Never use any solvent-type cleaner such as alcohol or acetone. Do not use gun cleaner to clean or lubricate the HWS.

3. All moving parts of the sight are permanently lubricated. Do not try to lubricate them.
4. Never disassemble the sight’s optical assembly! The optical cavity is purged, nitrogen filled, and sealed to achieve fog resistant performance. Disassembly will void the warranty and damage the sight

The post 558.A65 appeared first on Weaponsights.

]]> 552.A65 https://weaponsights.com/product/552-a65/ Mon, 19 Jul 2021 15:47:39 +0000 https://weaponsights.com/?post_type=product&p=3970 The HWS 552 is the most popular night vision-compatible holographic weapon sight offered. The AA battery is available globally making these models a favorite. The mount is compatible with both 1" Weaver and MIL-STD-1913 rails and includes a hex cross bolt and thumbscrew.

The post 552.A65 appeared first on Weaponsights.

]]>

Description

  The Model 552 HOLOgraphic Weapon Sight (HWS) is fully compatible with all generation levels of Night Vision intensifier tubes. A special Night Vision (NV) setting allows the operator to immediately drop the brightness intensity of the holographic reticle to eliminate any “halo” effect while viewing through an image intensifier tube. The Model 552 can be positioned in tandem behind Night Vision intensifiers without any “bloom” of the target area. Now, operators can combine the proven Night Vision technological advantage with a superior close quarters weapon optic to achieve greatly enhanced weapon aiming – in complete darkness.

  Unlike active IR laser pointer systems, the HWS is a passive system and emits no muzzle-side signature. While in the NV mode, the HWS is not detectable by enemy night vision surveillance systems, providing operators with a stealth means for effective nighttime weapon aiming. All optical surfaces are flat and treated with anti-reflective coatings eliminating additional muzzle side signature due to reflective glare. No need for costly glare elimination filters that reduce the effective light transmission and further dim the target area. The projected reticle pattern is only visible to the operator.

  The Model 552’s unique switch allows the operator to instantly drop the holographic reticle brightness to the NV mode of operation. The operator has the ability to toggle back and forth between the NV mode and the normal day/night operation within fractions of a second. The Model 552 has 10 distinct Night Vision settings to provide maximum flexibility to the operator. Typically 3 to 4 brightness settings are not enough to support a host of constantly changing conditions including manufacturing variances in the sensitivities of the image intensifier tubes, varying ambient environments, and varying light gathering sensitivities of the human eye across users. The Model 552 still maintains the 20 normal brightness settings for normal day/night operations.

Made in USA

Night Vision Compatibility: Yes

Includes:

  • HWS 552
  • Quick-Start Guide
  • Warranty Card
  • 2x AA Alkaline Batteries
  • Protective Case
Models:
  • 552.A65 Reticle is a 65MOA circle with 1 MOA Aiming Dot
  • 552.XR308 Ballistic Reticle is a Semi-Crosshair with Ranging Dots for .308 cal

Specifications:

  • Button Position: Back of Optic
  • L x W x H:  5.6″ x 2″ x 2.5″ (142.2 x 50.8 x 63.5 mm)
  • Weight:  11.5 oz (326 g)
  • Water Resistant:  33ft. (10 m) depth
  • Mount:  1″ Weaver or MIL-STD-1913 rail
  • Windage & Elevation Adjustment:  0.5 MOA per click
  • Button Location: Back
  • Brightness:  20 daylight settings  &  10 additional settings for Gen I through III+ night vision devices
  • Power Source:  2 x 1.5 V AA batteries – Supports lithium, alkaline or rechargable
  • Operating Temperature:  -40°F to 140°F (-40°C to 60°C)
  • Battery Life:

-Lithium: 2,500 continuous hours at nominal setting 12 at room temperature
-Alkaline: 2,200 continuous hours at nominal setting 12 at room temperature

General Information

This manual is an overview of the 552 HWS (Holographic Weapon Sight), and will define the basic operation, features/benefits, and options of this proprietary optical system. The HWS is a state of-the-art optical sighting system, employing holo–graphic sighting technology for small to medium caliber weaponry and launching type platforms. The HWS utilizes holographic optics fabrication technology that is used in the production of advanced heads up display in attack fighter aircraft for targeting, gauge reading, weapon system verification, etc. L-3 EOTech has miniaturized the sophisticated sighting heads up display system into a compact and rugged package for use on small arms and other weapon platforms.
Key Attributes

The 552 HWS is a lightweight, non-magnifying, optical sight designed for close to mid-range engagements. It allows very fast target acquisition and engagement at short ranges while providing aiming capability out to 300 meters equal to or better than iron sights. The major combat advantage of the HWS is extremely rapid reticle-on-target acquisition. As quickly as a target is identified, the holographic reticle can be superimposed on the target. The sight allows operators to maintain eye contact on the target and to place the holographic reticle onto the target without shifting focus. Operators can quickly acquire the target and reticle in the same focal plane for fast and accurate shot placement. The HWS appears to project the holographic image of a reticle on the target plane. The sight can be used as a bright open reticle image or a fine dot which is limited only by the acuity of the shooter’s eye. The heads up display window allows an undistorted and unrestricted view of the target. The 552 is offered with one of the following (2) reticle options:
          • 0 – 68 minute ring with vertical and horizontal stadia and a 1 MOA aiming dot.
          • XR308- Ballistic reticle pattern for a .308 cal using 150gr M59 FMJ at roughly 2,800 fps using a 24.8″ barrel
The HWS offers extremely fast target acquisition in Close Quarter Battle (CQB) using the large ring, and aiming precision in longer range engagements (using the MOA Dot) without obscuring the target. Another advantage of the HWS is the full field of view which allows the operator better situational awareness. The HWS employs a true heads up display (HUD) window that eliminates blind spots and constricted or tunnel vision associated with scope sights. Controls are inset into the HWS housing with no protruding knobs, battery compartments, or rings obscuring the target. Utilizing natural binocular vision is an advantage of this sighting system, as well as additional threat identification through increased operator situational awareness and peripheral vision. The 552 can operate in tandem with Generation I – III+ night vision intensifier tubes. Operators can see the holographic reticle image with helmet mounted or weapon mounted night vision devices. The HWS is a passive system and emits no signature from frontal or from a peripheral aspect. While in the NV mode, the sight is undetectable by opposing force night vision equipment. The HWS can be positioned behind night vision systems without any “bloom” on the target area.

The primary use of the HWS is for the M4A1 carbine and CQBR in Close Quarters Battle. The HWS is not however, limited to carbines. The HWS can also be used on medium caliber machine guns, grenade launchers, bolt guns, crossbows, and less than lethal projectile launchers. The sight provides a 1X (no magnification) sight picture and is not designed as a long range sight system, however, it can be used as effectively as iron sights on targets to 300 meters. The advantage of the HWS is that it provides the operator superior shooting performance, rapid reticle-on-target acquisition, full field of view and accurate shot placement. The HWS can be naturally employed by all levels of users, from novice to the most highly trained operator.
          0 – 68MOA circle with quadrant ticks with 1 MOA aiming dot
          XR308 – (4) ballistic aiming dots designed around .308 caliber round
Location and Description of Major Components
Hood

The HWS is equipped with a protective hood. This hood is pre-assembled at the factory. Should your hood require repair or replacement, please contact your unit armorer for repair, replacement, or contact the manufacturer (L-3 EOTech) for repair or replacement.
Battery

Two initially supplied (2) AA alkaline batteries power the 552 HWS. The HWS is designed to maintain constant brightness at a particular setting as the battery drains down. The reticle brightness will not fade gradually as the battery runs down, but rather, shut down abruptly. The first indication of the battery draining is the reticle blinking when the unit is turned on. Another indication of a low battery is the reticle pattern blinking off and on during recoil. With high recoil guns, this can occur before the battery check indicates low battery condition. If the reticle pattern blinks off and on during recoil or turns off suddenly, replace the battery. Please read and follow the battery replacement and battery check procedures described in this Manual. It is always good practice to replace the battery with a fresh one before a mission.

Alkaline batteries from different manufacturers are not all constructed the same way. Tests show some brands are more susceptible to degradation by the shock of recoil. We recommend the use of Energizer batteries with the HWS. Lithium AA batteries offer longer life, particularly at temperatures below freezing. For this reason Lithium AA batteries are recommended for cold weather operations. However, it should be noted that the battery checking function, which is based on the characteristics of alkaline batteries, does not operate properly when Lithium AA batteries are used in the model 552 and may not indicate a low battery condition until very little battery life is left.

 

Replacing the Batteries

Remove the battery compartment by lifting up on the locking cam lever and carefully sliding the battery compartment away and up from the sight housing. After the battery compartment is removed, slide the batteries out and replace them with a fresh set. The labels on the bottom of battery compartment show the correct battery orientation. Always make sure the gasket is free of dirt before the battery compartment is reinstalled or the seal may be compromised. To reinstall the battery compartment, point the sight towards the ground and slide battery compartment onto base. Make sure there is enough clearance between the contact and the batteries to avoid bending the contacts. Hold the battery compartment down firmly against the base and close the locking cam.Before you push down on cam lever, make sure the battery compartment sits all the way down and is parallel to the base. Verify correct battery installation immediately by turning on the sight and checking if the holographic reticle appears. If the batteries are left in the sight backwards, they will be drained of their power.
Windage and Elevation Adjustment

CAUTION – When encountering an increase in resistance in adjustments, the end of the adjustment range has been reached. DO NOT turn the adjustments any farther, serious damage may occur to the sight.

Preventive Maintenance Checks and Services (PMCS)

OPERATOR LEVEL MAINTENANCE
The operator is limited to replacing batteries and cleaning the battery compartment and outer housing surfaces of the sight.
REPLACING BATTERY
See the heading ‘Replacing Batteries’ under section Description of Components, Controls, and Indicators. Do not use deteriorated or corroded batteries. Inspect batteries for rips, tears, or cuts in the housing. If there is any exposed, internal content of the battery, it could potentially effect the operation of the sight.
OPERATOR CLEANING INSTRUCTIONS
1. The optical system and the window are coated with anti-reflection material. When cleaning the glass surfaces, first blow away any dirt and dust. Fingerprints and lubricants can be wiped off with lens tissue or a soft cotton cloth, moistened with lens cleaning fluid or glass cleaner sold
in any camera store. Never clean the glass surface with a dry cloth or paper towel; always
dampen the glass surfaces prior to cleaning.
2. No maintenance is needed on the sight’s surface, except to occasionally wipe off with a soft cloth. Use only a water-based cleaner such as glass cleaner, ammonia, or soap and water. Never use any solvent-type cleaner such as alcohol or acetone. Do not use gun cleaner to clean or lubricate the HWS.
3. All moving parts of the sight are permanently lubricated. Do not try to lubricate them.
4. Never disassemble the sight’s optical assembly! The optical cavity is purged, nitrogen filled, and sealed to achieve fog resistant performance. Disassembly will void the warranty and damage the sight

The post 552.A65 appeared first on Weaponsights.

]]> Vudu 8-32×50 SFP https://weaponsights.com/product/vudu-8-32x50-sfp/ Tue, 13 Jul 2021 22:24:37 +0000 https://weaponsights.com/?post_type=product&p=3886 The Vudu 8-32x50 has the Maximum Magnification among the VUDU product line which gives the user the Maximum Accuracy Potential.

The post Vudu 8-32×50 SFP appeared first on Weaponsights.

]]>

Description

  The Vudu 8-32×50 is a second focal plane variable power optic with a 50mm objective. The second focal plane design is great for hunting as it keeps the reticle the same size throughout the magnification range. The Vudu 8-32x features competition-grade turrets and an HC2 MOA reticle that allows for fast target acquisition at low power and precise shots at higher power. The XC High-Density (HD) lenses offer a crisp, bright sight picture, and exposed, finger adjustable turrets allow lightning-fast adjustments on the fly.

SFP – Second Focal Plain

Controlled under Export Administration Regulations (EAR); may not be exported without proper authorization by the U.S. Department of Commerce. L3 EOTECH reserves the right to change the product specifications at any time without notice.

EXPORT RESTRICTIONS: Export is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.

 

Features:

  • Exterior Finish: Flat Black Type III Anodized
  • HC2 MOA reticle
  • Broadband anti-reflection coating
  • Type III anodized flat black finish
  • XC High-Density glass

Specifications:

  • Magnification:  3.5X – 18X
  • Tube Diameter:  34mm
  • Objective Lens:  50mm
  • Exit Pupil Diameter Low:  5.3 mm / High: 1.6 mm
  • Eye Relief Low:  3.39-3.86 in / High: 3.50-3.86 in
  • Field View 100Low: 13.20 ft / High: 3.30 ft
  • Reticle:  HC2
  • Reticle Type:  MOA
  • Focal Plane:  Second Focal Plane
  • Illuminated:  Non-Illuminated
  • Brand:  EOTech
  • Battery:  None (This product does not use a battery due to there being no Illumination)

Available SFP Models:

VDU1-8SFHC3  –  Vudu 1-8×24 SFP Riflescope – HC3 Reticle ( MOA )

VDU3-18SFHC1  –  Vudu 3.5-18×50 SFP Riflescope – HC1 Reticle ( MOA )

VDU8-32SFHC2  –  Vudu 8-32×50 SFP Riflescope – HC2 Reticle ( MOA )

 

Includes:

  • Vudu 8-32X50 Rifle Scope
  • Operator Manual
  • Reticle Manual
  • Sunshade
  • Throw Lever
  • Lens Cloth

 

The post Vudu 8-32×50 SFP appeared first on Weaponsights.

]]> Vudu 3.5-18×50 SFP https://weaponsights.com/product/vudu-3-5-18x50-sfp/ Tue, 13 Jul 2021 16:45:45 +0000 https://weaponsights.com/?post_type=product&p=3862 The Vudu 3.5-18X50 Second Focal Plane scope is ideal for that once in a lifetime big game hunt. It features EOTECH’s XC™ High-Density glass, rugged 34mm tube and easy-to-use tactical turrets equipped with covers.

The post Vudu 3.5-18×50 SFP appeared first on Weaponsights.

]]>

Description

  There are several quality rifle scopes on the market today, but none like the VUDU, which should be the ultimate hunter’s choice for medium to long-range shots when considering price and performance.

With the Vudu making that precise long-range shot is never going to be a problem for you.  Even in low light conditions taking the shot and returning to zero are easily accessed using the oversized machined turrets and EZ Check Zero Stop feature.

Additionally, when attempting to focus on the target, the Vudu makes it happen quickly with side-mounted parallax adjust feature. The Vudu is about as rugged and durable as a scope can be made of 34mm aircraft-grade aluminum, and the Vudu features high-density glass with EOTECH’s patented XC™ glass.  All exposed optic lenses of the Vudu have a broadband anti-reflection coating, and the push button control for illumination is quickly accessible and manipulated by the push of a finger.

This Vudu riflescope uses a single CR2032 battery and has a battery-saving automatic off feature after two hours.  If you are concerned about the battery’s lifespan, you should know that this riflescope from EOTech has around 500 hours of life when set at the middle brightness setting.  For the money, the EOTech VUDU 3.5 18×50 riflescope performs better than other more expensive scopes.  Instead of squinting through a set of iron sights to hit your target, use the EOTech Vudu to be sure you place that shot where it counts.

SFP – Second Focal Plain

Controlled under Export Administration Regulations (EAR); may not be exported without proper authorization by the U.S. Department of Commerce. L3 EOTECH reserves the right to change the product specifications at any time without notice.

EXPORT RESTRICTIONS: Export is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.

Features:

  • Exterior Finish: Flat Black Type III Anodized
  • Illuminated HC1 MOA reticle
  • Broadband anti-reflection coating
  • 2-hour auto power shut off
  • Approximately 500-hour battery life
  • Includes screw in adjustment bolt for quickly changing power

Specifications:

  • Magnification:  3.5X – 18X
  • Tube Diameter:  34mm
  • Reticle:  HC1 MOA
  • Reticle Type:  MOA
  • Eye Relief Low:  4.00 in / High: 3.50 in
  • Field View 100:  Low: 30.20 ft / High: 5.90 ft
  • Focal Plane:  Second Focal Plane
  • Illuminated:  Partial Illumination
  • Illumination Control: Push Button
  • Brand:  EOTech
  • Battery:  (1) CR2032

Available SFP Models:

VDU1-8SFHC3  –  Vudu 1-8×24 SFP Riflescope – HC3 Reticle ( MOA )

VDU3-18SFHC1  –  Vudu 3.5-18×50 SFP Riflescope – HC1 Reticle ( MOA )

VDU8-32SFHC2  –  Vudu 8-32×50 SFP Riflescope – HC2 Reticle ( MOA )

 

Includes:

  • Product User Manual
  • Reticle Manual
  • Sunshade
  • Throw Lever
  • Battery
  • Lens Cloth
  • Allen Wrench for Zero Stop

Reticle Specifications

There are a variety of reticles to choose from in each of the Vudu scope models. From speed rings that allow for quick target acquisition to intricate Christmas tree style (as shown below) reticles that offer precise hold solutions for drop and wind, the Vudu rifle scopes have you covered.

 

 

 

The post Vudu 3.5-18×50 SFP appeared first on Weaponsights.

]]> Vudu 1-8×24 SFP https://weaponsights.com/product/vudu-1-8x24-sfp/ Mon, 12 Jul 2021 20:42:42 +0000 https://weaponsights.com/?post_type=product&p=3847 Boost your speed advantage up close and add next-level surgical precision at distance. The new 1-8x24 Second Focal Plane rifle scope will deliver magnification governed by a throw lever and featuring a daylight-visible illuminated quadplex BDC reticle. Bright, ultra-clear HD glass with fully multi-coated lenses optimize target acquisition, all locked in a virtually indestructible single-piece T6 aircraft-aluminium tube. Controlled by smooth, exacting, low-profile turrets. So you can dial in your finest performance at any range.

The post Vudu 1-8×24 SFP appeared first on Weaponsights.

]]>

Description

  The EOTECH Vudu 1-8×24 is a Second Focal Plane variable power optic with a 24mm objective. The second focal plane design is great for hunting as it keeps the reticle the same size throughout the magnification range. The Vudu 1-8x features an illuminated HC3 MOA reticle that allows for fast target acquisition at low power and precise shots at higher power. It utilizes push button controls, powered by one CR2032 battery with a 500-hour runtime and will automatically shut off after 2 hours with of no movement. The broadband anti-reflection coated lenses provide a crisp, bright sight picture and exposed, finger adjustable turrets allow lightning fast adjustments on the fly.

SFP – Second Focal Plain

The Vudu scope is constructed from a solid piece of aircraft-grade aluminum and finished in type III anodized flat black and the lens are coated in a broadband anti-reflection coating to reduce the chance of scope glint. These features combined make for an extremely compact and rugged scope that can withstand competition and use in the field. Also included with this scope is a bolt that screws into the adjustment ring and allows you to quickly change the power of your scope during competition. This scope is a great match for any AR15 or even bolt action rifle and will get the job done when it matters most.

Features:

  • Type III anodized flat black for weather resistance
  • Illuminated HC3 MOA reticle
  • Broadband anti-reflection coating
  • 2-hour auto power shut off
  • Approximately 500-hour battery life
  • Includes screw in adjustment bolt for quickly changing power

Specifications:

  • Magnification:  1X – 8X
  • Tube Diameter:  30mm
  • Objective Diameter:  24mm
  • Reticle:  HC3
  • Reticle Type:  MOA
  • Focal Plane:  Second Focal Plane
  • Illumination:  Illuminated
  • Brand:  EOTech
  • Battery:  (1) CR2032
  • Powered by (1) CR2032 battery

 

Available SFP Models:

VDU1-8SFHC3  –  Vudu 1-8×24 SFP Riflescope – HC3 Reticle ( MOA )

VDU3-18SFHC1  –  Vudu 3.5-18×50 SFP Riflescope – HC1 Reticle ( MOA )

VDU8-32SFHC2  –  Vudu 8-32×50 SFP Riflescope – HC2 Reticle ( MOA )

 

Includes:

  • Product User Manual
  • Reticle Manual
  • Throw Lever
  • Battery
  • Lens Cloth

The post Vudu 1-8×24 SFP appeared first on Weaponsights.

]]> Vudu 5-25×50 FFP https://weaponsights.com/product/vudu-5-25x50-ffp/ Wed, 21 Apr 2021 18:37:12 +0000 https://weaponsights.com/?post_type=product&p=2760 Description   It combines reliable first focal plane ranging with a unique push/pull elevation turret’s locking system and EOTECH’s EZ Chek Zero Stop promote easy adjustment and instant return to zero. All in an ultra short design that leaves ample room to clip-on a night vision or thermal device behind rifle scope and make adjustments …

Vudu 5-25×50 FFP Read More »

The post Vudu 5-25×50 FFP appeared first on Weaponsights.

]]>

Description

  It combines reliable first focal plane ranging with a unique push/pull elevation turret’s locking system and EOTECH’s EZ Chek Zero Stop promote easy adjustment and instant return to zero. All in an ultra short design that leaves ample room to clip-on a night vision or thermal device behind rifle scope and make adjustments to the device without ever leaving the optic.

FFP – First Focal Plain

Models:

VDU5-25FFMD3  –  5-25×50 FFP Riflescope – MD3 Reticle (MRAD)

VDU5-25FFH59  –  5-25×50 FFP Riflescope – H59 Reticle (MRAD)

VDU5-25FFTR3  –  5-25×50 FFP Riflescope – Tremor 3 (MRAD)

 

Includes:

  • Product User Manual
  • Reticle Manual
  • Throw Lever
  • Sunshade
  • Battery
  • Lens Cloth
  • Allen wrench for zero stop

The post Vudu 5-25×50 FFP appeared first on Weaponsights.

]]> Vudu 3.5-18×50 FFP https://weaponsights.com/product/vudu-3-5-18x50-ffp/ Wed, 21 Apr 2021 16:05:57 +0000 https://weaponsights.com/?post_type=product&p=2754 Description   A 34mm aircraft-grade aluminum tube houses the Vudu Optics 3.5-18x rifle scopes XC™ High-Density (HD) glass, while a host of other performance-enhancing features take you to the farthest reaches of your shooting abilities. Its oversized, precision-machined turrets with EZ Chek Zero Stop, allow you to quickly adjust and return to zero, even in …

Vudu 3.5-18×50 FFP Read More »

The post Vudu 3.5-18×50 FFP appeared first on Weaponsights.

]]> Description

  A 34mm aircraft-grade aluminum tube houses the Vudu Optics 3.5-18x rifle scopes XC™ High-Density (HD) glass, while a host of other performance-enhancing features take you to the farthest reaches of your shooting abilities. Its oversized, precision-machined turrets with EZ Chek Zero Stop, allow you to quickly adjust and return to zero, even in low-light conditions. Its side-mounted parallax adjustment facilitates rapid reticle focus for the most challenging long-range shots.

FFP – First Focal Plain

Controlled under Export Administration Regulations (EAR); may not be exported without proper authorization by the U.S. Department of Commerce. L3 EOTECH reserves the right to change the product specifications at any time without notice.

Models:

VDU3-18FFMD1  –  3.5-18×50 FFP Riflescope – MD1 Reticle (MRAD)

VDU3-18FFMD2  –  3.5-18×50 FFP Riflescope – MD2 Reticle (MOA)

VDU3-18FFH59  –   3.5-18×50 FFP Riflescope – H59 Reticle ( MRAD )

 

Includes:

  • Product User Manual
  • Reticle Manual
  • Throw Lever
  • Battery
  • Lens Cloth
  • Allen wrench for zero stop

The post Vudu 3.5-18×50 FFP appeared first on Weaponsights.

]]> Vudu 1-6×24 FFP https://weaponsights.com/product/vudu-1-6x24-ffp/ Tue, 13 Apr 2021 19:06:35 +0000 https://weaponsights.com/?post_type=product&p=2687 Description   Created with the avid 3-gun competitor and serious hunter in mind, the Vudu 1-6×24 scope is compact, yet fully loaded for maximum performance near and far. Equally effective on AR platforms and your favorite bolt-action rifle. Its EOTECH-style speed ring reticle is designed for fast target engagement at low power, while delivering the …

Vudu 1-6×24 FFP Read More »

The post Vudu 1-6×24 FFP appeared first on Weaponsights.

]]>

Description

  Created with the avid 3-gun competitor and serious hunter in mind, the Vudu 1-6×24 scope is compact, yet fully loaded for maximum performance near and far. Equally effective on AR platforms and your favorite bolt-action rifle. Its EOTECH-style speed ring reticle is designed for fast target engagement at low power, while delivering the resolution and accuracy you need for longer range targets. It’s the perfect solution for short to medium range applications that demand high durability and extreme accuracy.

FFP – First Focal Plain

 

Models:

VDU1-6FFSR1  –  1-6×24 – SR1 Reticle  ( MRAD )

VDU1-6FFSR2  –  1-6×24 – SR2 Reticle  ( MOA )

VDU1-6FFSR3  –  1-6×24 – SR3 Reticle  ( MOA )

VDU1-6FFSR1G  –  1-6×24 – SR1 Reticle  ( MRAD ) GREY

 

Includes:

  • Product User Manual
  • Reticle Manual
  • Throw Lever
  • Battery
  • Lens Cloth

 

 

The post Vudu 1-6×24 FFP appeared first on Weaponsights.

]]>