The 2-Tab Ocular Flip Cover can be attached directly to the Eyepiece end of the DFOV14 & DFOV156 (This Flip Cover is interchangeable with either sight) without any additional parts, however in order to attach the 2-Tab Flip Cover to the Objective End, you will need either an Attachment Ring (PN: SDR-AR4-AR) or a Killflash (ARD) with a knurled (or profiled) edge (PN: ARD-SDR-B for Black or ARD-SDR-T for Tan).

The Anti-Reflection Device (ARD), also known as a Killflash can be purchased separately, however Weaponsights.com includes the ARD (except the TR139) and Flip Covers with every sight purchased. Please note, the TR139 does not have an available ARD (KillFlash) and the Flip Covers simply attach to this optic.

If your SpecterDR or SpecterOS has the older style Anti-Reflection Device (KillFlash) with a smooth edge; you’ll need to use an Adapter Ring to attach the Objective Flip Cover or upgrade to the newer ARD with a knurled edge. For those of you with the smooth edge ARD’s, because of a change in the Flip Cover design, you’ll also need to ensure that your Flip-Covers have 1 single Tab…not 2. The single Tab design will work with the Adapter Rings.

The new 2-Tab Flip-Cover design eliminates the Adapter Ring, which had a tendency to crack when over-tightened, which was very easy to do with a metal screw and plastic ring.

Again…

In order to attach the Objective Flip Cover, you have to have either

1. The Old Style (Smooth) ARD + Adapter Ring + 1 Tab Flip Cover
2. The New Style (Profiled Edge) ARD + 2 tab Flip Cover
3. An Attachment Ring + 2 Tab Flip Cover

This Attachment Ring works in place of the ARD. If the ARD is installed, unthread & remove the ARD by turning it counter-clockwise, then install the Attachment Ring by threading it clockwise into the objective end. The Attachment Ring has a profiled edge, similar to the ARD and allows you to install a 2 Tab Flip Cover.

The Attachment Ring Part Number for the SFOV4 and DFOV14 sights is SDR-AR4-AR.

The Attachment Ring Part Number for the DFOV156 sight is SDR-AR6-AR

One more time…you must have the ARD or Attachment Ring installed in order to use the 2 Tab Objective Flip Cover.

New design (2 Tab) Ocular (Eyepiece) Flip Coves no longer require the Adapter Ring and the same Flip Cover will fit both the 1X-4X & 1.5X-6X Models.

If you have the older style single tab Flip Cover (PN: UAC013-FCR), you will need the Adapter Ring as well.

KillFlash ® ARDs use a high-tech honeycomb material to provide a low-cost, retro-fittable, field-practical way to hide reflections from optical surfaces.

Anti-Reflection Devices

Premium Optic Performance:
The 2″ honeycomb KillFLASH^® ARD provides the same performance as a 6″ sunshade. Premium performance, reduced size.

XLUME^® Coating:
Tenebraex’s^® proprietary XLUME^® coating absorbs light, further reducing the potential for glint or reflections.

Designed for Military:
Tenebraex^® KillFLASH^® ARD’s were designed for the USA military and millions are in use around the world.

Optic Lens Protection:
Protect your optic lens from damage and scratches.

OPTIC INSTALLATION:
Simply screw into front of scope. Do NOT use any thread lock compounds.Carefully thread into the objective (front) of the optic. There is a risk of cross threading on finer threads. The ARD should screw in without any resisitance. Once the ARD is fully threaded and finger tight, continue to hand tight. Do not use thread sealants or tape. To remove, turn counter clockwise.

OPTIC CLEANING
Treat the honeycomb grid with the same care you would any fine optical surface. If clogged with dirt or grit, remove ARD from optic and blow clean.
If necessary, run palin water through the honeycomb to clear it. Tap the killFLASH^® housing lightly on a surface to clear excess water, then blow through it to remove the remainder and dry it. Reinstall ARD.

---

Lens Covers

• These scope covers are designed to stay locked when closed and flip back out of your way when open.
• Protect the lenses on your scope from dust, dirt, grime and grit.
• Full range of options for both the objective and ocular end of your scope or optic.
• A full 360° of rotation means you can locate your open covers exactly where you need them, expanding your sight.
• Huge inventory to fit most major optic make and models of scopes. Don’t see what you’re looking for? Please feel free to contact us directly!
• Designed for the US Military and used by millions, our MIL-SPEC covers represent years of proven performance in the toughest environments.

---

Adapter Rings

INSTALLATION of Adapter Frame Ring:
Slip adapter over ocular (eyepiece) or objective end of scope until it seats. Turn the T15 Torx bolt until it is finger tight. Once finger tight, tighten another 1/4 to 1/2 turn. To remove, loosen Torx bolt and pull straight backwards off of optic.

INSTALLATION of Adapter Ring:
Carefully thread the adapter ring into the objective (front) of the optic. There is a risk of cross threading on finer threads. The adapter ring should screw in without any resisitance. Once the adapter ring is fully threaded and finger tight, continue to hand tight. Do not use thread sealants or tape. To remove, turn counter clockwise.

The post ELCAN Accessories appeared first on Weaponsights.

–  This Item has a Double Discount ( Normal Company Discount + Coupon Code Available )  –

The DRS (Defendu Reflex Sight) is so versatile and effective at close range, it is named it after the famed Lt. Colonel William Ewart Fairbairn whose Close Quarters Combat system was designed to rapidly disable an opponent with potentially lethal force.

Perfect for tactical operations or home defense, the 1x reflex sight offers three reticles calibrated for speed and accuracy at 7, 25 and 50 yards.

The ultimate CQB sight, it is built with legendary Steiner’s legendary ruggedness. Lightweight, compact and simple to use.

Features:

• Window size is .96 x 1.26 in. (height x width).
• Overall height is 2.57″ and sits 2.35″ above the rail
• Rugged Magnesium Body
• Seven Illumination Levels (4 Day/3 Night)
• 13 Hour Auto Shutoff
• Adjustable for Windage/Elevation
• Waterproof/Fogproof/Shockproof
• Two (2) AA Batteries provide 2,000+ Hours of use
• Designed, Machined & Assembled in the USA!

Specifications:

• MAGNIFICATION – 1x
• SPECIAL FEATURE – 3 Reticle Modes
• RETICLE – C2 Reticle
• RETICLE COLOR(s) – Red
• FINISH – Black
• ELEVATION ADJUSTMENT, TOTAL CAPABILITY – 50 MOA
• WINDAGE ADJUSTMENT – 1/2 MOA
• LENGTH – 3.88 in.
• WEIGHT – 10.4
• ILLUMINATION SETTINGS – 7 illumination settings
• BATTERY – Two AA, can run on one

The post DRS1X appeared first on Weaponsights.

Item#: 8700 Micro Reflex Sight (MRS)
Item#: 8700-U DISCONTINUED

Smaller, lighter and more compact than most Red Dot sights, the New Steiner MRS is extremely strong and durable with a housing to protect the optics in all weather conditions. Due to the small size and weight, the MRS can be mounted direct to virtually any weapon or added to higher magnification sights with a Picatinny Style Rail. This enables CQB operations and woks perfectly with Steiners ICS (Intelligent Combat Sight) and Prism Sights.

Because the Eye Relief is unlimited, the MRS can be used on handguns, rifles, shotguns, and anything with a Picatinny Rail…even crossbows & paintball guns. Low magnification provides an extremely large Field of View, which is Parallax Free from 10 to 150 yards. A special reflective coating is sandwiched between two highly polished lenses (which protects the narrow reflective surface from scratches and abrasions) and is designed to reflect the Red Colored Aiming Dot perfectly for your eye to see. The outside surfaces of the lenses are fully coated as well. The reliable MRS is then 100^ sealed against water and fully water pressure proofed.

Product Features: 

1X MAGNIFICATION – for both eyes open capability and better situational awareness

ACCURATE SHOOTING WITH EITHER HAND – regardless of eye dominance

HOLOGRAPHIC 3 MOA RED DOT – provides a clear aiming point in any light condition.

FULLY ADJUSTABLE – for windage and elevation with 1 MOA click adjustment.

CHOICE OF AUTOMATIC BRIGHTNESS CONTROL – or 3 manual levels for day/night operation.

45 MOA ELEVATION ADJUSTMENT – in both directions.

BATTLE READY, HARD-ANODIZED-FINISH – is nearly indestructible.

WATERPROOF AND SHOCKPROOF – and submersible to 10 meters.

INTEGRATED SCREW MOUNT – attaches to any Weaver or Picatinny Rail.

ONE CR1632 BATTERY – powers 550 hours of operation.

AUTO-OFF FUNCTION – turns off after 8 hours to preserve battery life.

SET-UP:

The MRS operates with one commercially available CR1632 Lithium Battery. To insert or replace the battery, unscrew the battery cover of the MRS (no special tools are required). Make sure that the positive (+) pole of the battery is facing up…or facing out [Negative side (-) towards the unit]. Replace the battery cap, but do not over-tighten. Keeping the battery contact surfaces clean will ensure reliable operation. As with ANY battery operated device, remove the battery for long term storage to reduce corrosion caused by battery leakage.

Ambient Conditions – The MRS is water-resistant to 33′ (10m) submersion and will withstand rain or snow. However, after exposure to salty or dirty water, it is advisable to rinse with distilled water and carefully dry the sight with air or lint (scratch) free cloth, as with any quality optical equipment.

Picatinny / Weaver Mount

To install the MRS on a Picatinny or Weaver Style Rail, loosen the clamp nut on the right side of the mount by turning it counter-clockwise. Place the mount on the rail with the screw in the desired slot. Check to be sure all the clamping edges are engaged and the safety thread (retention strap) of the battery cap is not clamped. Keep a little pressure on the sight (towards the muzzle) while tightening the clamping nut clockwise. Tighten to approximately 20″ pounds.

Elevation and Windage Adjustment – There are separate adjustment screws for the Elevation and Windage.  The Elevation adjustment screw is located on the top of the sight, and the Windage screw is located on the right side of the unit.

Zeroing the Point-of-Impact – Adjust the point-of-impact by using a screwdriver. The direction of the shift of the point-of-impact is indicated on the Elevation and Windage adjustment screws. One scale division on either adjustment screw corresponds to 1 minute of angle (MOA), or approximately 1″ (inch) at 100 yards. For other distances, this value is proportional. Parallax is at 40m.

Power Modes – The power button is located on the left side of the sight. For greater versatility to accommodate any light condition, there are 4 settings that can be used to adjust the brightness on the Red Dot each time the button is pushed. These include:

#1 Automatic Adjustment – A light sensor automatically senses the surrounding light conditions and adjusts the brightness so that it is not overpowering in low light, yet visible in bright daylight.

#2 Highest Brightness Setting

#3 Medium Brightness Setting

#4 Lowest Brightness Setting

To turn the power off, simply press the power button once more to completely shut off the electrical circuit and save your battery.

Integrated Control Electronics – The integrated control circuit adjusts the brightness of the aiming dot according to surrounding light levels. The brightness sensor on the front of the sight senses the light level in the direction of the target and modifies the intensity of the dot accordingly so that it is not overpowering in low light while remaining highly visible in bright daylight. Be sure not to obstruct the sensor. Clean if necessary.

The post MRS appeared first on Weaponsights.